Stainless Steel Wall Mount Manifold Cabinets

Home PageStainless Steel Wall Mount Manifold Cabinets

Stainless Steel Wall Mount Manifold Cabinets

Manifold cabinet

XFMC Cabinets

Wall-mounted stainless steel cabinets for snow melt manifolds

Rhella manifold cabinets protect Xtreme-Flow snow melt manifolds on exterior walls, in garages and in mechanical rooms. 16 gauge 201 stainless steel, a lockable removable front panel and perforated openings on both ends for side supply and return connections. Four sizes fit XFM manifolds up to 22 loops.

4Sizes 22Loops max. 16 ga201 stainless In / outIndoor or outdoor

Built for the job site

1

Lockable front

The front panel locks and lifts off completely for full access to the manifold, valves and flow meters.

2

Side connections

Two 2-3/4″ perforated openings on each end let supply, return and loop piping enter from either side.

3

Indoor or outdoor

Weatherproof construction for exterior walls exposed to snow, rain and road salt.

4

201 stainless steel

1.3 mm (16 gauge) stainless steel body for a long service life without painting.

Sizes and dimensions

Model Fits XFM manifold A B C D Weight
XFMCS8 up to 8 loops 31-1/2″ 26-3/4″ 8-3/4″ 2-3/4″ 32 lb / 14.5 kg
XFMCM8 up to 12 loops 41-3/4″ 26-3/4″ 8-3/4″ 2-3/4″ 40 lb / 18.1 kg
XFMCL8 up to 16 loops 55-1/8″ 26-3/4″ 8-3/4″ 2-3/4″ 50 lb / 22.7 kg
XFMCX8 up to 22 loops 70-3/4″ 26-3/4″ 8-3/4″ 2-3/4″ 60 lb / 27.2 kg

A Overall width · B Overall height · C Depth · D Diameter of the perforated side openings. Choose the cabinet by the number of loops on the XFM manifold it will hold.

Photos

Stainless Steel Wall Mount Manifold Cabinets
Stainless Steel Wall Mount Manifold Cabinets
Stainless Steel Wall Mount Manifold Cabinets

Technical data

Material201 stainless steel, 1.3 mm (16 gauge)
Front panelLockable and removable
Side openingsTwo 2-3/4″ perforated openings on each end
MountingWall mounted, indoor or outdoor
FitsRhella 2″ XFM Xtreme-Flow snow melt manifolds
SizesXFMCS8, XFMCM8, XFMCL8, XFMCX8
Height × depth26-3/4″ × 8-3/4″ (all sizes)
IncludedCabinet with lockable front panel; manifold sold separately

About Rhella manifold cabinets

Snow melt manifolds often sit on an exterior wall or in a garage, exposed to road salt and moisture. Rhella stainless steel manifold cabinets are made from 1.3 mm (16 gauge) 201 stainless steel with a lockable, removable front panel and 2-3/4″ perforated openings on both ends for side supply and return connections. Four sizes fit Rhella Xtreme-Flow snow melt manifolds from 8 to 22 loops, mounted indoors or outdoors. For below-grade installations, use the in-ground manifold vaults.