Stainless steel hydronics
Everything between the heat source and the emitters
Design tools
Simulate before you specify
4-in-1 · 304 stainless
Hydraulic separators
Separation, air, dirt and magnetite removal in one vessel. 1″ to 2″ union and MNPT.
ANSI 150 flanges · Pall rings
Commercial hydraulic separators
Flanged 4-in-1 separators with dirt magnet and pressure gauge. 2-1/2″ to 6″.
3-in-1 · 304 stainless
Air & dirt separators
Pall ring air removal with a neodymium dirt magnet. 3/4″ to 6″.
RAM · 304 stainless · flow meters
Radiant manifolds
1″ headers, 2 to 13 loops, 14 GPM. Flow meter on every loop, actuator-ready.
HFM · 304 stainless · flow meters
Hi-Flow manifolds
1-1/4″ headers, 2 to 12 loops, 18 GPM. Taconova flow meter on every loop.
201 stainless
Cabinets & vaults
Lockable wall cabinets and in-ground vaults for XFM manifolds.
SUS304 plates · copper brazed
Heat exchangers
Brazed plate heat exchangers for water and glycol, 30 to 60 plates.
304 stainless
Hydronic headers
Header pairs from 1-1/4″ to 2″ with up to 8 branches.
ETA330 · 304 stainless
Expansion tank arms
Wall support for the largest tanks, with air vent and gauge.
+1 905-904-2772 · [email protected] · Concord, Ontario