Stainless Steel Air and Dirt Separators

Home PageStainless Steel Air and Dirt Separators

3-in-1 · 304 stainless steel

AIR Air & Dirt Separators

3/4" union to 6" ANSI 150 flanged, 6 to 572 GPM

Air and dirt in a hydronic system cause noise, poor heat transfer, pump wear and corrosion. Rhella 3-in-1 air separators remove entrained air, suspended dirt and ferrous particles in one 304 stainless steel unit, for heating and chilled-water systems.

3/4" – 6"Connection sizes
6 – 572GPM
150 psiMax. pressure
2 yearsWarranty
Rhella AIR150P stainless steel air and dirt separator with magnet

3-in-1 performance

1

Air elimination

Stainless Pall rings coalesce micro-bubbles; the automatic vent discharges them.

2

Dirt filtration

Controlled velocity settles dirt and non-magnetic particles for the service drain.

3

Ferrous capture

A removable M50 neodymium rod protects pumps and valves from abrasive wear.

4

Serviceable

Remove the air vent to wash out and fully drain any size. Integrated fill port.

Selection table

ModelConnectionMagnetPall ringsWeight, lbFlow, GPM
AIR075P3/4" Union MNPT✓✓1.16
AIR100P1" Union MNPT✓✓1.310
AIR125P1-1/4" Union MNPT✓✓1.715
AIR150P1-1/2" Union MNPT✓✓2.422
AIR200P2" Union MNPT✓✓2.939
AIR250P2-1/2" Flange✓✓51108
AIR300P3" Flange✓✓67144
AIR400P4" Flange✓✓76398
AIR600P6" Flange✓✓114572

Union models ship with press, sweat or FNPT tailpieces, specified at ordering. Flanges: ANSI B16.5 Class 150.

Air separator or hydraulic separator?

Use an air separator when the system has one pump circuit. When the boiler or heat pump has its own pump, use a hydraulic separator; it includes the same air, dirt and magnet functions.

See the LLH hydraulic separators.

Technical data

Body and Pall rings304 stainless steel
MagnetM50 neodymium rod, 12,000 gauss, rated 90 °C
Max. pressure150 psi
Max. temperature210 °F
FluidsWater, max. 50% glycol
ConnectionsUnion MNPT or 2 × ANSI B16.5 Class 150 flanges
Warranty2 years