E15-19 FC

Home PageE15-19 FC

E15-19 FC ΔT, Setpoint, Constant P ECM Circulator

  • Motor: Permanent magnet  115 VAC 60 Hz
  • Differential pressure controller
  • Modes of operations:  ΔT, Constant Pressure, Constant Speed, Setpoint Cooling, Setpoint Heating, Auto
  • Boiler Protection
  • Strator and rotor: stainless steel shielded wet
  • Capacitor: 20 uf/200V
  • Body Material: Cast Iron
  • Ambient temperature range: 32°F -104°F (0°C ~ +40°C)
  • Relative Humidity: Max. 95%
  • Pumped liquid temperature: 35°F -230°F (2°C – 110°C)
  • Max pressure: 145psi (1MPa)
  • Max flow: 17 GPM
  • Max head 19.6 ft

To prevent condensation forming in the electronics and rotor, the temperature of the pumped liquid must always be higher than the ambient temperature!

ModelVoltsAmpsWatts at High/Med/Low SpeedsSystemVT2218
E15-19FC115 V0.05-0.675-45ClosedVT2218
Liquid Temperature≥185°F (85°C)≥194°F (90°C)≥230°F (110°C)
Inlet Pressure2 ft (0.6m) Head 0.7 psi (0.05 bar)10 ft (3m) Head 4 psi (0.28 bar)33 ft (10m) Head 14.5 psi (1 bar)
ModelEMC StandardDegree of ProtectionConnectionShipping Weight
E15-19FCEN61000-6-1, EN61000-6-3IP42GF25 Flange7.4 lbs